|
Setting
standards in the industry
| |
|
|
WIWA-Airless
Ideal
Model 6060, 10032
The
picture shows model 10032
Efficient
performing unit for continous use
Fields
of Application: Furniture industry, machinery and commercial
vehicles, steel fabricators,industrial painting
contractors, foundries, automatic and/or manual painting lines
|
| |
Sprayable
Materials :Using Non-Stainless (N-version)units; oils
and fats, primer, spary filler, lacquers and varnishes, two-component
materials, hammertone, zinc-based paints.Using Corrosion Resistant
(R-version): as above and additionally, water-based materials.
Model 4032 in Stainless Stell (RS-version): as above, and
additionally , acidic and /or alkaline paints
| Technical
Data |
6060 |
10032 |
| Pump
ratio |
60:1 |
32:1 |
| Max.free-flow
output (ltr./min) |
6,0 |
10,0 |
| Output
per cycle (ccm) |
38,15 |
72 |
| Max.
input air (bar) |
6,5 |
8 |
| Max.tip
size(mm) |
1X0,66 |
1X0,79 |
| Max,
tip size (inch) |
0,026 |
0,031 |
| Accessory
set no (for RS-version no 10) |
03 |
02 |
|
| |
|
WIWA
- Airless Super
Model 10066, 15042
Well
Known for its ruggedness in its latest design
Field
of Application : General industrial coatings, industrial
painters, steel fabricators, insultaion, ships painting,
automatic and/or manual coating lines
|
 |
| |
Sprayable
Materials : Enamels and coating, highly viscous and coarse
pigmented two -component and tar epoxies, bitumen and high
- built, solvent free and low solvent coating, insulating
materials
| Technical Data |
10066 |
15042 |
| Pump ratio |
66:1 |
42:1 |
| Max.free-flow output (ltr./min) |
10.0 |
15.0 |
| Output per cycle (ccm) |
72 |
106 |
| Max. input air (bar) |
6,5 |
8 |
| Max.tip size(mm) |
1X1,0/4X0,53 |
1X1,2/5X0,53 |
| Max, tip size (inch) |
0,039/0,021 |
0,046/0,021 |
| Accessory set no (for RS-version no 10) |
03 |
02 |
All
units as standard furnished without spary accessories.Corresponding
Accessory Set for Ready-to-Spary Outfit consisting of hose,
gun, tip and /or "Easy Clean" tip assembly to be
ordered separately.
|
|
