Prism Surface Prism Location
 
 
Material Handling Technology
Prism Surface
 
Material handling technology is very critical in painting. Before and after painting, the movement of the components should be handled in an appropriate manner. In this case the conveying system takes centre stage.
MHT MHT
Floor-mounted-conveyor Overhead-conveyor 1 Power and free- Conveyor

There are various types of conveying systems used to move the parts through the painting line. The general classification is given below:-

Manual push pull monorail conveyor
Enclosed track continuous power conveyor
Heavy duty I- beam continuous power conveyor
Power and free conveyors
Belt surface conveyor
Single track ground mounted chain conveyor with skid/trolley pushing facility
Triplex ground mounted – 3 track conveyor
Chain-on-edge conveyor
Overhead electric hoist system used in dip pre-treatment (Manual/PLC/SCADA)
Overhead electric crane system used in dip pre-treatment (Manual/PLC/SCADA)
Semi-automatic loading and un-loading system to facilitate transfer of component with flight bar to and from conveyor.
Fully automatic loading and un-loading system to facilitate transfer of component with flight bar to and from conveyor.
Indexors (rotating devices)